G-CDC Glass Fitting Original Cat Door Clear
$49.99
The door that started it all — the original Catwalk® glass fitting cat door, refined since 1999. Glazed into a round hole in the glass panel itself — the cleanest way to give your cat their own entrance through a sliding door, French door or window. Designed and made by Pet-Tek since 1999.
- Cats of all sizes
- 3-year warranty
Usable opening (W × H)165 × 180 mm
Flap panel (W × H)165 × 193 mm
FitsGlass 3–10 mm
Overall size275 × 275 mm
Cut-out245 mm diameter
ColourClear — also in white (G-CDW)
FitsGlass 3–10 mm — single glazing
SKUG-CDC
GTIN09421006250014
In stock
Specifications
| Usable opening | 165 × 180 mm |
|---|---|
| Flap panel | 165 × 193 mm |
| Replacement flap | G-CDRF |
| Overall size | 275 mm wide × 275 mm high |
| Glass cut-out | 245 mm diameter |
| Suits | Cats up to 7 kg |
| Warranty | 3 years |
Guides & Downloads
Features
4-way lockingIn only, out only, fully open or locked — control exactly when your cat comes and goes.
High-swing flapThe flap swings higher than standard designs, reducing stress on the flap and hinge.
Self-lining, no external screwsA clean finished look on both sides of the glass.
Quiet, sealed actionFull brush seal and near-zero flap tolerance keep draughts out — with a light closing action every pet can manage.
Built for Australian sunUV-stabilised, high-impact polycarbonate that won’t yellow, fog or harden.
Easy flap replacementYears from now, a new flap (G-CDRF) brings it back to new in minutes.
Good to know: toughened or double-glazed panels can’t be cut after manufacture — your glazier orders a replacement panel with the 245 mm hole pre-cut, then fits the door. Any glazier can arrange this, or use our installer directory.
Common Questions
Will this door suit my cat?
Yes — the 165 mm wide × 193 mm high flap panel (a 165 × 180 mm usable opening) suits cats up to 7 kg, and the closing action is deliberately light enough for a cat to push through comfortably.
Can it go in my sliding glass door?
Yes — it glazes into a round 245 mm hole cut in the glass panel itself, in glass 3–10 mm — single glazing.
My glass is toughened — is that a problem?
Toughened glass can’t be cut after manufacture, but the fix is routine: your glazier orders a replacement panel with the hole pre-cut and fits the door into it.
Who installs it?
A glazier does the glass cutting and fitting — use our installer directory or any local glazier. The door itself clamps into the hole with no external screws.
Will it keep the weather out?
Yes — a full brush seal and tight flap tolerance block draughts, and internal drainage angles carry water out of the door body. In truly exposed, gusty positions, pair it with an external deflector and the in-only lock setting.
What happens if the flap wears out years from now?
You replace just the flap, not the door — the G-CDRF replacement flap clips in within minutes and brings the door back to new.
| Weight | 0.6 kg |
|---|---|
| Dimensions | 590 × 325 × 30.5 mm |
Only logged in customers who have purchased this product may leave a review.







Reviews
There are no reviews yet.